Setup & Mapping
How to Create No-Go Zones for Your Robot Vacuum
No-go zones keep a mapped robot away from cords, pet bowls and delicate rugs without physical barriers. Here is how to set them up so they hold.
Quick answer
Open the saved map in the app, draw a no-go zone slightly larger than the object, save it, and test it with a short run. Use a no-mop zone for rugs you want vacuumed but not wetted.
Types of zone
| Zone | What it does | Typical use |
|---|---|---|
| No-go zone | Robot will not enter | Pet bowls, cable clusters, fragile items |
| No-mop zone | Vacuums but keeps mop away | Carpets and rugs on a mopping robot |
| Virtual wall | A line the robot will not cross | Doorways and open passages |
How to draw one
- Open the map screen and find the zone or restricted-area option.
- Draw a box or line around the area, slightly larger than the object.
- Save and give it a label if the app allows.
- Run a short clean to confirm the robot respects it.
Why zones drift
Zones are stored relative to the map. If the map shifts after a re-map or the dock is moved, the zone can end up in the wrong place. Re-check zones after any re-mapping; see mapping setup.
Physical boundaries
A few older or simpler robots use a magnetic strip or a beacon instead of app zones. Check whether your model supports app-based zones before relying on them.
Related fixes
If the robot keeps getting caught on the same object, a zone is often the simplest fix; see stuck under furniture and keeping robots away from toys and cords.
Frequently asked questions
Will a no-go zone stop the robot crossing to reach another room?
Only if it blocks the only route. Draw zones so a path remains.
Do no-go zones work with every model?
No. Support depends on the model and app; check the manual.
Can I schedule a zone to apply only some days?
Some apps support this. Check your app's zone options.